In today's post I originally wrote that the shuttle of my Hengstenberg/Anker machine worked in the opposite way to all other shuttles that I know - that loosening the tension screw increases thread tension instead of decreasing it. The screw in my shuttle is permanently jammed all the way in, and this conclusion was based… Continue reading Correction on the Hengstenberg/Anker shuttle
It took a long time but my little Hengstenberg/Anker is finally working! The motor This was in February 2018 - over two years ago. I had cleaned her up and got her sewing with the original 12x1 needle, and attempted to fit a motor. The difficulty here was that not only does the Saxonia balance… Continue reading Hengstenberg/Anker finally working!
I have four long bobbin machines, five if you count the little one too. Three are vibrating shuttle machines, one is a cylindrical transverse shuttle - all four "medium" tailors' machines. The fifth one is a Wittler hybrid - a transverse vibrating shuttle. These five machines between them not only can sew any fabric under… Continue reading My secret weapon
It happened again - I rescued another poor soul. Start here First impressions 189? The ships The head The feed The mechanism compared to Singer 12 The first transformation 2 February 2018 Despite the looks, it is a rather special old dear: a Hengstenberg/Anker transverse vibrating shuttle known as the Wittler mechanism (no, I've never… Continue reading The Hengstenberg/Anker Wittler – a transverse vibrating shuttle